Thursday 30 August 2012

How To Install A Garage Door Opener


Installing a garage door opener is not a simple do it yourself job. However, it is true that the Phoenix Garage door Openers made today are much easier to install than a few years ago. There is nothing that prevents you from installing the opener if you have reasonable DIY skills.



You can find the installation instructions explicitly with the majority of all kits garage door opener new. It is imperative that you follow these instructions exactly. Whatever you do, do not become a know it all and try to work on yourself. In reality, garage door openers can be very dangerous if not installed properly, because of high tension springs are used. You can easily end up hurting yourself or someone around you.

The first step before installing a garage door opener is to check to what extent the garage door itself works. Most, if not all garage doors are quite heavy. A garage door opener is designed for a certain weight of the door. It should go without saying that ensure the garage door opener that you install can work with the weight of your door. You might find that your door is too light, in this case, must be strengthened.

Control the actual operation of the garage door should be your next step. If you find that the door does not open easily, it could be due to faulty springs that must be repaired before attempting to adapt to the opener. If the garage door has seen better days, you may be looking to install a new one. If this is the case, you must also ensure that the framework is capable of supporting the new door that opens new course development.

The garage door opener has a power unit. Make sure your site where it will not get in the way of someone walking into the garage. The opener power cord that should be available to an adult. Although it should go without saying, the power supply must be disconnected when working with permanent wiring required to power the first game.

More hands make less work and it may be faster to call for help during the installation of your garage door opener new. You will need a selection of tools such as a ladder, drill, spirit level, tape measure, hammer, screwdriver various cutters, pliers, wrench and hacksaw.

There are three distinct types of garage door. The simplest and to accommodate the drive screw. Once installed, it requires little or no maintenance since it has no belts or chains. All garage door openers must, by law, have a built-in safety function that reverses the door if this should happen to hit something or someone on his way down. Make sure all control knobs are mounted wall out of reach of young children so that they do not play with the door. For more safety infrared beam boxes should be installed near the bottom of the garage door opening.

Installing a garage door opener should only be undertaken by someone who, in the more advanced DIY jobs. Whatever you do, do not cut corners when it comes to security. Apart from everything else, garage doors are very heavy and can be very dangerous if not handled properly. As the size and weight of the garage door springs are also a danger because of the high voltage, they are subject.